Titanium Filter Element Technical Data

Raw Material: Titanium

Filter Rating Range: 0.22 Micron ~ 100 Microns

Filter Efficiency: > 99.99 %

Operation Temperature: ≤ 300 ℃

Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 

                              70 mm, 80 mm, 90 mm, 100 mm

Length: 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others  

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization

Titanium Filter Element Feature

1. Titanium filter element is made from titanium powder particle

2. Titanium filter element is sintered in a high temperature vacuum furnace

3. Titanium filter element is depth filtration

4. Titanium filter element is suitable for food industry and medicine industry (GMP) because titanium is an in-noxious metal and an inert metal

5. Titanium filter element is backwash

6. High corrosion resistance

7. High porosity

8. High mechanical strength

9. High filter efficiency

10. High dirt holding capacity

11. High flow rate at low differential pressure

12. High temperature resistance

13. Washable and Cleanable

14. Reusable

15. Long service life

Application

1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)

2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)

3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)

4. Catalysts powders recovery

5. Precoat support filtration

About Us

XINXIANG ZWEN FILTER CO.,LTD produces titanium filter cartridge, titanium filter disc, titanium filter disk, titanium filter element, titanium filter pipe, titanium filter plate, titanium filter rod, titanium filter sheet, and titanium filter tube.

XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.

XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test. 

XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.

XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.

Contact Us

XINXIANG ZWEN FILTER CO.,LTD

HEAD OFFICE: NO.412 FANG, SI LOU, NO. 101 FUXING GUOJI, DONGBEI JIAO JINSUI DADAO HE XINFEI DADAO, HONGQIQU, XINXIANG, HENAN, CHINA

AFTER SALES SERVICE ADDRESS: NO.728, GONGYUAN GUOJI, DONGBEI JIAO JINSUI DADAO HE XINER JIE, HONGQIQU, XINXIANG, HENAN, CHINA

FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYEQU, XINXIANG, HENAN, CHINA

TEL: +86-373-5807218

FAX: +86-373-5895995

EMAIL: info@zwenfilter.com

WEBSITE: www.zwenfilter.com

WEBSITE: www.leerfilter.com             

WEBSITE: www.ti-frit.com

WEBSITE: www.ti-filter.com

WEBSITE: www.titanium-frit.com

WEBSITE: www.titanium-filter.com

WEBSITE: www.metal-sintered-filter.com

WEBSITE: www.sintered-porous-filter.com

WEBSITE: www.pleated-stainless-steel-filter-element.com

WEBSITE: www.pleated-stainless-steel-filter-cartridge.com

ZWEN Workshop 

ZWEN QC 

ZWEN Clients